Free Review Cars

1. Turn your vehicles ignition off and press and hold the two outer buttons on your Audis system until the red indicator light begins to flash.
2. Press and hold the button on the remote you wish to program until the indicator light begins flashing.
3. Leave your car and hold your remote near the right headlight.
4. Press the open button on your remote and hold it until the hazard lights blink three times.
5. Press and hold the HomeLink training button inside of the car until the indicator light glows solid. If the light does not turn solid, continue to the following steps.
6. Press and hold the smart button on your garage motor, located on the side or back near the antenna wire.
7. Press the train button on your Audi system within 30 seconds of pressing the smart button and wait for the indicator light to glow solid. The programming will now be complete and your remote will be ready to use.

Programming the First Key
1. Insert your electronic key into the ignition and turn it to the On position. Allow the key to remain there for 10 minutes and 30 seconds.
2. Turn the key to the Off position within 45 seconds and then return it to the On position, allowing it to remain for another 10 minutes and 30 seconds.
3. Repeat step two, leaving the key in the ignition for 10 minutes and 30 seconds for a third time.
4. Cycle the key to the Off position and then back to the On position to end the programming sequence.
Programming Additional Keys
5. Insert your first key into the ignition and turn it to the On position.
6. Leave the working key in the ignition for five seconds and return it to the Off position and remove it from the ignition.
7. Insert the additional key into the ignition and turn it to the On position for five seconds as well.
8. Turn this key to the Off position and back to the On position to complete the programming sequence for your additional key.